Troubles And Solutions Of Flat Head Injection Packaging Machine

Update:29 Sep 2020

The Flat Head Injection Packers machine is a type of packaging machine. However, regardless of the packaging machine, the faults and solutions are mostly similar. We have listed them and summarized them as follows:
First of all, it may be that the electromagnet does not pull in. Most of the reasons for this failure are the internal failure of the host, the blowout of the electromagnet coil, and the line interruption. The solution is: firstly check whether there is a problem inside or outside the host; secondly, check the electromagnet fuse, check whether the electromagnet is energized, eliminate the mechanical jam, and check the internal power supply when everything is normal;
Secondly, what is often encountered in weighing and packaging machines is that the reasons for this failure are: sensor damage, bridge voltage failure, line connection or interruption is wrong, the troubleshooting method is: check the load of the sensor and the connection or the host Signal, when detecting the bridge and amplifying circuit or the computer output display circuit, sometimes the system stability is not good and the bag quantity is unstable. To solve this problem, you can test whether the circuit is faulty.
If there are other failures, please consult and contact us, we will do our best to solve the problem for you.