Introduction To The Use Of High Pressure Grease Nipple

Update:26 Aug 2020

The High Pressure Grease Fitting refers to the pressure grease cup, which is the simplest way of mechanical lubrication. Divided into: straight-through pressure injection cup, joint pressure injection cup, screw cap pressure injection cup. Used to connect the grease gun and mechanical equipment.
The main working principle is as follows: the grease gun must first be connected to a hose or a hard tube, and then a flat nozzle is connected to the tube, and the flat nozzle is connected to a grease nipple. The other end of the grease nipple is a thread, which is screwed to the mechanical equipment.
Precautions for cleaning the high pressure grease nozzle:
1. It is best to beat butter once a month. Otherwise, the shaft pin will be completely rusted and will not move at all. Basically, it is because the operator doesn't take the butter seriously.
2. The gap between the oil seal and the pin sleeve has entered the sand, gravel and other objects during construction. The gap between the gaps should generally be wrapped tightly with iron wire, plastic hose, car inner tube, etc.
3. Clean up impurities, gravel, and dust before installing the new parts.
The above is a related introduction to the high-pressure grease nipple. If you are interested in our products, please consult and contact us.